Rose electronics CrystalView fiber CRK-1DFM/SUN, Инструкция по установке и эксплуатации

Страница: 33 / 36

CRYSTALVIEW PRO FIBER
INSTALLATION AND OPERATIONS MANUAL
27
Appendix C. Firmware updates
The CrystalView Pro Fiber firmware may be updated when
additional enhancements and improvements are developed.
Contact Rose Electronics technical support for information on
firmware updates.
Appendix D. Rack mount instructions
The optional rack mount kit includes the following items:
„
Two black anodized mounting brackets.
„
Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your CrystalView Pro Fiber, attach the two rack
mounting brackets to your Unit with the short flange against the Unit
using the four screws provided. Do not over tighten the screws
used to mount the Unit to the mounting brackets. Use only the
hardware provided, using hardware other than that provided could
cause damage to the electronics and/or result in loss of mounting
integrity. Secure the mounting brackets to the rack using the
appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a).
Do not exceed the operating temperature of 10
ο
C to 45
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to
prevent instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain
relief for all cables.
Appendix E. Rack mount illustration