TransVue HDMI 4K2K Scaler Manual
3
Installation
Please follow these steps to set up and operate the HDMI 4K2K Scaler:
1. Power off all video sources sources (PC, STB, BLURay, video server) and monitors
2. Connect the HDMI video source cable to the input port (4K@24Hz, 3840×2160@24/25/30Hz or 1080p)
3. Connect the HDMI output ports to the HDMI displays
4. Connect the pr5VDC external PSU to the Scaler device and power on
5. Power on the HDMI video source and the two monitors
6. When the video input is detected, the corresponding LED will illuminate
1 2 3 4 5
1 = HDMI video input source
2 = LED”s 4K2K and 1080p
3 = Bypass switch Up/Down
4 = Mini USB service port (supplier only)
5 = +5VDC, 2.5A
HDMI 4K2K Scaler – Front Panel (input)
1 2
1 = Scaled video output port
2 = Bypass (native resolution) video output port
HDMI 4K2K Scaler – Rear Panel (output)
EDID Management
Video EDID is detected provided the displays and the video source are connected when the system is powered
on. If either display monitor is replaced, the HDMI 4K2K Scaler will need to re-powered so that it can acquire
the new EDID information
