35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Parts
(continued)
Step 5
Snap all sections of the SuperSnap
open.
Fig. 7
Note:
It is easier to open and close the
SuperSnap by starting at one
end and working your way down
the holder.
Step 6
Insert graphic into one section of
SuperSnap (top and bottom).
Fig. 8
Step 7
To close, snap the SuperSnap shut.
Fig. 9
Step 8
You should now have one graphic in
place.
Repeat steps 5-7 for hanging
additional graphics.
Step 9
Push end caps into place.
Fig 10
Step 10
Suspend holders.
Finished Look
Important note:
Please save and reuse the
SuperSnap, End Caps, AnoConnectors,
and MultiClips for future projects.
Instructions for assembly
Incept-9.12.02
The SuperSnap and AnoConnector are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSSuperSnapAnoConnector
AnoConnector
06-2930
Multi Clips
1UP-0100
SuperSnap
12S300
SuperSnap™ with AnoConnector
Instruction Sheet
Page 2 of 2
Finished Look
Open all holders
6” Rod
97-0304-06
Figure 8
Figure 7
Figure 10
Figure 9
Insert posters