Parts
Gotcha
®
is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSGotcha/SWClip
Instructions For Hanging
Instruction Sheet
Incept-1.12.00
GotchaClip
™
For Slatwall
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut.
Fig. 1
Note:
It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert the GotchaClip for Slatwall into the slot on
the back side of the top Gotcha Holder only. (You
should hear a “SNAP” when the clip is inserted
properly).
Fig. 2
Step 3
Tilt holder and clip at a slight angle and slip the
GotchaClip for Slatwall hooks into grooves in the
slatwall.
Fig. 3
Important note:
Please save and reuse the Gotcha Holder and
GotchaClip for Slatwall for future projects.
Gotcha
12G100
GotchaClip
s
for Slatwall
Figure 1
Figure 2
Figure 3
