Parts
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut.
Fig. 1
Note:
It is easier to open and close the Gotcha
Holder by starting at one end and working your way
down the holder.
Step 2
Slide the Gotcha Holder into the AnoQuick Holder.
Fig. 2
Step 3
Install MultiClip in the top AnoQuick Holder.
Holding clip at slight angle, first insert one round
end, then press down on other round end and push
MultiClip into holder.
Fig. 3
Note:
For OneUp applications place the MultiClip
in the center of the AnoQuick Holder.
Fig. 4
Step 4
Push end caps into place.
Fig. 5
Note:
To remove Gotcha (and sign), simply rotate
end cap up out of the way.
Step 5
Suspend poster.
Important note:
Please save and reuse the AnoQuick Holder, Gotcha
Holder, End Caps and MultiClips for future projects.
AnoQuick™ with Gotcha
®
Insert
Instructions for Hanging
Incept-9.9.02
The AnoQuick is a trademark and Gotcha
®
is a registered trademark of
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use of these
products. Part #02INSAnoQuickGotchaMC
Gotcha
®
Special
(no clip rail)
AnoQuick
12A300R
End Caps
06-5525
OneUp
®
Instruction Sheet
MultiClip
1UP-0100
Figure 1
Figure 4
Figure 2
Figure 5
Figure 3
