Parts
Instruction Sheet
AnoGotcha™
Step 1
Insert T-Top Gotcha Holder into
AnoGotcha Shell.
Fig. 1
Step 2
Push end caps into place.
Fig. 2
Step 3
Snap the AnoGotcha Holder completely
open so that hinge is turned up as far as
possible. Insert poster into holder until top of
poster meets top of holder. To close snap the
AnoGotcha Holder shut.
Fig. 3
With large or curling graphics, it may be easier to
insert graphic at one end and slide into holder
from one end to another.
Step 4
Install Wall Mounting Hangers using
wood screws and a Phillips head screwdriver.
Make sure that the Wall Mounting Hangers
are level.
Fig. 4
Step 5
Suspend poster.
Important note:
Please save and reuse the AnoGotcha Holder,
End Caps and MultiClips for future projects.
Instructions for Hanging
Incept-9.9.02
AnoQuick™ and AnoGotcha
™
are trademarks and Gotcha
®
is a registered
trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use
of these products. Part #02INSAnoGotchaSQWallHangers
Figure 4
End Caps
06-5525
AnoGotcha Shell
12AG400
T-Top Gotcha
Frame Wall
Mounting Hanger
06-6067
Wood Screws
or Molly Anchors
2010SC
16-0016
Figure 3
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Figure 1
Figure 2
