Parts
Step 1
Install four (4) corner brackets (2 each
end) into solid rail opposite split rails.
Fig. 1
Step 2
Push remaining solid rails onto rail
from Step 1 to make three (3) sides
of the frame.
Fig. 2
Step 3
Slide Gotcha into top and bottom
rails as shown.
Fig. 3 & 4
Step 4
Install remaining corner brackets into
ends of split rails.
Fig. 5
Step 5
Insert Cable and Saucer into end of
AnoGotcha Solid Rail.
Fig. 6
Step 6
Assemble split rails onto frame one
at a time.
Fig. 7
Instruction Sheet
AnoGotcha™ Frame
Instructions for Hanging
Incept-9.12.02
AnoGotcha
™
is a trademark of Rose Displays, Ltd. Neither the manufac-
turer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of these products.
Part #02INSAnoGotchaFrameSaucer
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Continued on next page
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Cable and
Saucer
16-0018SS
T-Top Gotcha
Split Rails
Corner
brackets
AnoGotcha
Solid Rail
12AG400
