Parts
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Step 6
On one panel, insert one joiner bar into
top channel of top aluminum rail and one
joiner bar into bottom channel of bottom
aluminum rail.
Slide joiner bar into corresponding
channels of connecting rails on second
panel. Fig. 7. Slide rails together. Fig. 8.
Repeat Step 6 for additional panels.
Note: Apply tape to the back of graphic
panels to secure seam.
Step 7
Insert end caps onto rails. Fig. 9.
Instructions for connecting multiple panels
Incept-4.11.03
The AdvanceTrak™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSAdvanceTrak
Figure 7
Figure 8
Figure 9
Aluminum Rail
Joiner Bar
End Cap
AdvanceTrak™
Instruction Sheet
12AR300
Page 2 of 2
