QUICK REFERENCE GUIDE
PAGE 1
Twin Stim IV
Model: DI2717
1
2
Top
Side
Front
Back
3
4
5
6
7
8
9
10
11
LCD Display
Body Part Selection
Channel 1 Intensity Buttons
Set Button
Power Button
Channel 2 intensity buttons
Pause Button
LED Charging Indicator Light
Lead Wire Output Sockets
Battery compartment cover
Belt Clip
USB Charging Port
1
2
3
4
5
6
7
8
9
10
11
12
The purpose of this guide is to assist you in correctly operating your
InTENSity™
Twin Stim IV
TENS/NMES (DI2717) unit. This device should only be used under
the continued supervision of a licensed physician. This guide is not intended
to replace or substitute the
InTENSity™ Twin Stim IV
Instruction Manual.
PLEASE READ THE INSTRUCTION MANUAL COMPLETELY BEFORE USING
THIS DEVICE. Read, understand and practice the IMPORTANT SAFETY
PRECAUTIONS AND WARNINGS found on pages 6 – 12 of your user manual.
Always follow the operating instructions prescribed by your healthcare provider.
S
M /
CH1
CH2
1
2
3
4
6
5
7
8
9
11
10
12
Twin Stim IV
ELECTRODES
(4 PADS)
WALL CHARGER
& USB CABLE
LEAD WIRES
(1 PAIR)
Li RECHARGEABLE
BATTERY
S
M /
Twin Stim IV
QUICK REFERENCE GUIDE –
TWIN STIM IV
PAGE 5
QUICK REFERENCE GUIDE –
TWIN STIM IV
PAGE 6
14
NMES — SET PRESET PROGRAMS — P1 & P2
11
SET RAMP UP TIME
12
SET CONTRACTION TIME
Set Ramp Up/Down Time
Press [ S ] button to set the ramp up and down
time and the “sec.” will flash and you will see
the below image circled in red on the screen.
Press [ + ] or [
−
] adjust the treatment time.
Set Contraction Time
Press [ S ] button to set the contraction time
and the “sec.” will flash along with the symbol
circled in red to the left. Then press [ + ] or [
−
]
button to adjust the time.
Set Relaxation Time
Press [ S ] button again to set the relaxation time
and the “sec.” will flash along with the symbol
circled in red to the left. Then press [ + ] or [
−
]
button to adjust the time.
After you finished settings, press [ S ] or [
]
button to confirm, the device will back to standby
status.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
13
SET RELAXATION TIME
Select Treatment Mode
Press [ M/II ] button to select the NMES treatment
mode. Select the body part which you want to
treat. Press the body part button until the LCD
displays program “P1” or “P2” like the screen
on the left.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
Manufactured for:
Roscoe Medical
21973 Commerce Parkway
Strongsville, Ohio 44149
Ph: (800) 3-ROSCOE (376-7263)
www.roscoemedical.com
TM
