QUICK REFERENCE GUIDE
PAGE 1
Select Combo II
Model: DI2195
1
2
Top
Side
Front
Back
3
4
5
6
7
8
9
10
11
LCD Display
Body Part Selection
Channel 1 Intensity Buttons
Set Button
Power Button
Channel 2 intensity buttons
Pause Button
LED Charging Indicator Light
Lead Wire Output Sockets
Battery compartment cover
Belt Clip
USB Charging Port
1
2
3
4
5
6
7
8
9
10
11
12
The purpose of this guide is to assist you in correctly operating your
InTENSity™
Select Combo II
TENS/NMES/IF/RUSS (DI2195) unit. This device should only be
used under the continued supervision of a licensed physician. This guide is not
intended to replace or substitute the
InTENSity™ Select Combo II
Instruction
Manual. PLEASE READ THE INSTRUCTION MANUAL COMPLETELY BEFORE
USING THIS DEVICE. Read, understand and practice the IMPORTANT SAFETY
PRECAUTIONS AND WARNINGS found on pages 6 – 12 of your user manual.
Always follow the operating instructions prescribed by your healthcare provider.
S
M /
CH1
CH2
1
2
3
4
6
5
7
8
9
11
10
12
Select Combo II
ELECTRODES
(4 PADS)
WALL CHARGER
& USB CABLE
LEAD WIRES
(1 PAIR)
Li RECHARGEABLE
BATTERY
S
M /
Select Combo II
QUICK REFERENCE GUIDE –
SELECT COMBO II
PAGE 5
QUICK REFERENCE GUIDE –
SELECT COMBO II
PAGE 6
14
NMES — SET PRESET PROGRAMS — P1 & P2
Select Treatment Mode
Press [ M/II ] button to select the NMES treatment
mode. Select the body part which you want to
treat. Press the body part button until the LCD
displays program “P1” or “P2” like the screen
on the left.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
Manufactured for:
Roscoe Medical
21973 Commerce Parkway
Strongsville, Ohio 44149
Ph: (800) 3-ROSCOE (376-7263)
www.roscoemedical.com
TM
16
SET PULSE WIDTH
Pulse Width
Press [ S ] button to enter the pulse width and the
“µs” will flash. Press [ + ] or [
−
] button to adjust the
pulse width.
IF — SET PRESET PROGRAMS — P1 & P2
RUSS — SET PRESET PROGRAMS — P1 & P2
17
SET PULSE BEAT (LOW & HIGH)
18
SET CYCLE TIME
Set Pulse Beat (Low & High)
Press [ S ] button to enter the pulse
beat and the
“
Hz
”
will flash.
Press [ + ] or [
−
] button to adjust
pulse beat.
Set Cycle Time
Press [ S ] button to set the cycle time and the “sec.”
will flash and you will see the image circled in red
on the screen to the left. Then press [ + ] or [
−
]
button to adjust the treatment time.
19
24
Select Treatment Mode & Body Part
Press [ M/II ] button to select the IF treatment
mode. Select the body part which you want to
treat. Press the body part button until the LCD
displays program “P1” or “P2” like the screen
on the left.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
Select Treatment Mode & Body Part
Press [ M/II ] button to select the RUSS treatment
mode. Select the body part which you want to
treat. Press the body part button until the LCD
displays program “P1” or “P2” like the screen
on the left.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
15
20
IF — SETTING THE MANUAL PROGRAM — U1
RUSS — SETTING THE MANUAL PROGRAM — U1
To set your IF (Interferential) Manual Program refer back to Step 5,
then return to Step 16.
To set your RUSS (Russian) Manual Program refer back to Step 5,
then return to Step 21.
21
RUSS — SET RAMP UP TIME
22
RUSS — SET CONTRACTION TIME
Set Ramp Up/Down Time
Press [ S ] button to set the ramp up and down
time and the “sec.” will flash and you will see
the below image circled in red on the screen.
Press [ + ] or [
−
] adjust the treatment time.
Set Contraction Time
Press [ S ] button to set the contraction time
and the “sec.” will flash along with the symbol
circled in red to the left. Then press [ + ] or [
−
]
button to adjust the time.
Set Relaxation Time
Press [ S ] button again to set the relaxation time and
the “sec.” will flash along with the symbol circled in
red to the left. Then press [ + ] or [
−
] button to adjust
the time.
After you finished settings, press [ S ] or [
] button
to confirm, the device will back to standby status.
To set your treatment time refer back to Step 5.
To start your treatment refer back to Step 7.
23
RUSS — SET RELAXATION TIME
