7
5.
Dry with clean towels or allow to completely air dry. Reassemble the
nebulizer and store the parts in a cool, dry place.
Cleaning Technique
(Performed after last treatment of the day or before first time use):
1.
Follow steps 1-4 under “Rinsing Technique”.
2.
Wash all nebulizer parts, mouthpiece and other optional
components in warm water and a mild detergent. Rinse in hot tap
water.
NOTE
: For first time cleaning or after the unit ahs been stored for an
extended period of time, thoroughly clean all components. The
nebulizer is dishwasher safe.
3.
Prepare a vinegar/distilled water solution of one part white vinegar
to three parts distilled water.
4.
Submerge the rinsed parts in the vinegar/distilled water solution for
30 minutes.
5.
Follow steps 4-5 under “Rinsing Technique”.
Cleaning the Main Body (Compressor)
The compressor should be cleaned with a soft cloth moistened with water
and dried with a soft cloth.
NOTE:
Any other form of cleaning or cleaning agents may damage the finish
on the unit.
Changing the Air Filter
It is important to change the air filter approximately every 30 days or when
the air filter turns gray.
1.
Remove the air filter cover by gently peeling back the rubber
cover.
2.
Discard the gray air filter.
3.
Replace with a new, clean air filter.
4.
Securely reattach the air filter cover to the unit.
NOTE:
Air filters cannot be cleaned or washed. Do not substitute alternate
material such as cotton. Do not operate without an air filter.
