2
QUICK REFERENCE GUIDE
PAGE 2
Generously moisten the silver strips on the inside of the garment with a conductive spray or with
water. The moisture acts coupling substance and ensures the effectiveness of the treatment.
Connect the pigtail snap connectors to the
conductive garment as pictured.
Be sure to have them securely in place.
1
APPLY CONDUCTIVE SPRAY OR WATER
ON SILVER STRIPS ON INSIDE OF GARMENT
4
5
PLUG LEAD WIRES INTO STIMULATOR
AND BEGIN TREATMENT
Be sure the electrical stimulator is off. Securely plug the lead wires into
the stimulator. Following the treatment provided by your practitioner,
turn the stimulator on and adjust as directed by practitioner.
Conductive Neck Garment
CONNECT PIGTAIL
SNAP CONNECTORS
PLUG LEAD WIRES INTO SNAP
CONNECTORS
Insert the pins of the lead wires into the ends of pigtail snap connectors
that are connected to the garment. Make sure no metal is visible.
PLACE CONDUCTIVE GARMENT ON
NECK
Remove all jewelry from the area that will
be covered by the garment. Clean the skin
thoroughly with soap and water.
Place the Conductive Neck Garment on the
back of the neck area with the pigtail lead
wires facing downward as shown below.
Securing in place using the Velcro
™
fastener
that is sewn into the ends of the garment.
Make sure the garment is placed and
conforms directly on the skin.
3
6
CLEANING INSTRUCTIONS
After use, hand wash in cold water only. Dry flat at room temperature
only. Do not place in a dryer or use an iron on the garment. Do not use
bleach.
For more information about your Conductive Garment, please visit us online at roscoemedical.com or call 1-800-871-7858.
