Rosco STSK7316, Инструкция по установке и эксплуатации

Страница: 13 / 17

13
TROUBLESHOOTING
SYMPTOM CAUSE REMEDY
No Power Power Cable Check the voltage & fuse in the power cable
No Image Camera Check the voltage in the camera cable, secure connector
Monitor Check the reverse trigger wire connection, re-secure
camera input connector.
Extension Cable Check for cable damage and secure the connector.
Image is not clear Camera Lens Check and clean dirt or moisture on the glass with a
slightly damp soft cloth.
Check and fix if the camera is not in the proper position or
blocked. Check if the camera lens is damaged
Monitor Color If the screen image is fuzzy, adjust color, brightness and
contrast controls using the MENU options in the monitor.
Check and fix if Day/Night/Auto Dimmer option is not set
properly.
Blue/Black Screen Camera Check the camera cable connection and secure it
Monitor Power on/off Monitor and see if it clears the problem
Check and see if MENU button is working normal
Can’t adjust on-
screen menus Menu disabled For safety reasons, on-screen menus lock out while in
trigger mode. Only adjust on-screen menus in steady-on
mode.
Split screens appear
while reversing the
vehicle Monitor Press MODE button few times and change split screens to
show Channel 1 full mode screen only. Once operator
selects single camera view (either manually or by reverse
trigger), this setting will be memorized and will appear
upon subsequent system starts.
No video signal
appears while
reversing the vehicle Camera Check and secure the reverse trigger wire connection and
also secure the camera video input connection.