Rosco Silk 210 Скачать руководство пользователя страница 15

Rosco extensively tests batteries with Silk

TM

 210 on a range of color temperatures 

and dimmer settings.
The batteries listed on page 15 have successfully passed benchmark testing 
and the table is derived from real life testing which can be used as a guide to 
expected running time at various fixture settings.
Many other batteries offered from a range of manufacturers may work but 
their performance and reliability cannot be confirmed by Rosco.
Use  only  Lithium  Ion  batteries  >=100W  with  this  Silk  luminaires.  Irreparable 
damage may occur to the driver board when using lower power batteries or 
batteries with a different chemistry.
Rosco has tested many Lithium Ion batteries currently available and a list of 
test results and expected run times are shown on page 15.

sIlk

Tm

 210 flICker free

Silk

TM

 210 has been tested at 1,000fps, 1,500fps, 2,000fps and 3,000fps at a 

range of color temperatures.
Silk

TM

 has also been verified at 1,000 fps at 100%, 50% and 25% output and it 

is rock solid with no evidence of wavering or flicker.

A Vision Research Miro LG320S was used for the test and a high speed specialist 
validated the process and results.

- 14 -

Содержание Silk 210























Отзывы: