Safe-T-Scope
®
Backup Camera System
STSK7360
5. When there is the TRG1(Rear light) input, CAM1 video will be shown on the screen.
with button, the 2 split screen CAM2/CAM1 or CAM1/CAM3 could be displayed.
6. In case of light on emergency blinker (TRG2+TRG3), the monitor display CAM1~
CAM4 as quad split screen. And the screen goes former one when the signal
(light on emergency blinker) is disappeared.
FUNCTIONS AND OPERATIONS
CAM2
Button
Button
CAM1
CAM3
CAM1
CAM1
CAM1
CAM1
CAM2
CAM2
CAM3
CAM4
The example is set with TRG1(Rear light)=CAM1 / TRG2(Left signal
light)=CAM2 / TRG3(Right signal light)=CAM3 / TRG4(etc)=CAM4.
i
15
FUNCTIONS AND OPERATIONS
7. When there is input signal more than 2 triggers, the monitor display fully connected
screen (Trigger input screen) as the priority order. And the screen goes former one
when the signal is disappears, the rest will be display as the priority order.
TRIGGER PRIORITY ORDER
TRG1(Rear light) > TRG2+3(Emergency light) >
TRG2(Left side light) > TRG3(Right side light) > TRG4
* If the screen turns by trigger signal, the POWER, MENU & MODE buttons are disabled.
* In the standby position if the trigger wire is activated the monitor will turn on.
The screen will turn off once the power is de-activated to the trigger wire.
The screen will then turn off when the trigger signal has gone off.
CAM3
CAM1
CAM4
SETTINGS
VIDEO SYSTEM
1.
NTSC/ PAL conversion
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “VIDEO SYSTEM“ and use to enter selection.
If using PAL system on NTSC system using county, it may cause a malfunction. The product
can convert NTSC / PAL system manually but it is not automatic. Before use, Please check
and set the system.
* NTSC system country: USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO, etc.
PAL system country : AUSTRALIA, GERMANY, U.K., NETHERLANDS, ITALY, etc.
16
