Step 1: Insert LitePad into Tray
Slide the 6”x12” LitePad into the
Axiom Tray. Be sure that the wire or
connector exiting the LitePad lines up
with the semi-circle notch in the Tray.
Semi-Circle Notch
Step 2: Pair Axiom Tray and Frame
Slide the Axiom Tray into the Frame
as shown in the image to the left.
One end of the Tray must slide into
the Frame before the other. The
semi-circle notch in the Tray should
line up with the semi-circle notch in
the Frame.
Step 3: Screw Frame to Tray
Screw in (5) 3/16” screws into all of
the holes indicated on the image to
the left. Use a standard #2 Phillips
head screw driver. Do not use
excessive torque.
Step 4: Attach Rubber Feet
Attach the (4) Rubber Feet using (4)
3/16” screws to the places indicated
on the image to the left. Use a
standard #2 Phillips head screw
driver. Do not use excessive torque.
www.rosco.com
