Qubex User Guide
Page 19
Web browser-based RAID manager via HTTP Proxy
The browser based RAID manager can be accessed via a HTTP Proxy. The Rorke Qubex
RAID System comes with proxy software for Windows based host systems.
To run the proxy software, double click on the executing file
archttp.exe
. The
Archttp
dialog
box appears. This allows a HTTP session to be established via the serial port. Connect the
supplied serial cable to an unused com port on the server and enter the com port number in the
dialog shown in the diagram below.
The Parameters for the General Setting are:
•
TCP Port value = 1 ~ 65535.
•
RAID Connected to value = 1 ~ 10 where 1 is for COM1, 2 for COM2 and so on...
•
BaudRate value = {2400, 4800, 9600, 19200, 38400, 57600, 115200}
NOTE: The RAID controller default baud rate is 115200.
When the program starts running, the following window appears:
To start the ArcHttp Proxy Server web-browser management, click
Start
.
Type the User Name and Password when prompted. The RAID controller default User Name is
"
admin
" and the Password is "
0000
". After entering user name and password, press
Enter
to start-
up the Http Proxy Server. The RAID Management software is now accessible.
