© ROPOX 2016
Page 11
6.4 Mounting of Verti unit
6.4.1 Lift VertiElectric onto mounting plate and
adjust that it is placed in the centre of
the wall unit, Mark additional 2 mounting
holes. Remove VertiElectric before
drilling and inserting of raw plugs.
6.4.2 Once more lift VertiElectric onto
mounting plate, place and adjust in
centre of wall unit. Secure the frame
with mounting one screw in centre.
6.4.3 Adjust the frame plumb with the 2
adjustment screws which are placed at
bottom coil/cylinder. Use 1 in each
side.
6.4.4 Insert and fasten remaining 2
adjustment screws.
6.4.5 Mark up the Four holes in the
back panel of the wall unit for
later adjustment according to
6.5.3 & 6.5.4
Ø 0.5in
(4x)
418mm/16.5in
2.44in
1.57in
