7
Safe locking
bracket
El
ectri
cal
Com ponents
Connections
Motor cables connects to plug 1 & 3.
Plug 2 & 4 are not in use and blocked.
Control switch connects to ”HB”.
W hen all cables has been connected,
use the safe locking bracket.
Pushed
in until you hear a “click”.
Mains cable connects to the plug at the
side of the box.
Disconnecti
ons
Mains cable can be pulled out (no safe locking bracket).
Before the other cables can be disconnected,
the safe locking bracket needs to
be released /
removed.
Locking clips at each end of the safe locking bracket has
to be released before the bracket can be removed,
and the cables can be
disconnected.
Placem ent of the hand control.
Bracket for hand control can be placed at the corner of the bathtub as shown.
To
be mounted with the two screws that are delivered with the bracket.
!!! The bracket should
only be used when the
bathtub
is
under
supervision.
I
n any other
situation,
the
hand
control shall be kept out
of the reach of children.
The bracket can also be
placed on the wall.
This
for safety reasons only.
To obtain the full I
P66 value,
it is very important that all the plugs has been
pressed firmly into the plugs and the safe locking bracket is mounted.
