Ropox Slimline Electric 40-15601, Руководство пользователя

Страница: 9 / 35

©
ROPOX 2017
8
Installation interfaces
Wall characteristics
The wall in the bathroom must be of proper screw material approved for wet rooms.
The product is load tested in accordance with DS/EN 12182 and ISO 17966, and the maximum user
load is:
40-15601: 200kg
40-15603: 200kg
40-15605: 120kg
40-15607: 120kg (when using a porcelain wash basin)
Maximum pull out force in the top screws: 68 kg/screw.
POWER
The power connection is located above the lifting unit to prevent water and splashing. The lifting
unit is supplied with a cable of 200 cm. The recommended location of the power connection is
illustrated on the drawing.
PLUMBING
The drain is Ø32 and ends in an Ø32x88.5° drain bend. The maximum protrusion of the drain
connection and the elbow from the wall is 77 mm to allow for covers for water and drain.
The water supply ends in 2 (two) 90° angled Ballofix valves with ½” outside thread. The water
supply should be located according to the instructions. It is recommended that the water
connection is angled at 45°, cf. drawing, to ensure a better movement of the water hoses. The
maximum protrusion of the shut-off valves is 75 mm from the wall to allow for covers for water
and drain.
It is recommended that the water connections and drain are located as illustrated on the drawing.
It is important that all hoses for the water connection and drain are flexible so that the frame can
move freely and unhindered within its height adjustment range of 70-100 cm (incl. washbasin).
The drain may also be positioned in the floor – in that case, however, it is not possible to use the
inside cover cap (40-15610).