Page | 10
TF 200.01.0014_eng
4.1.5
Mount the bracket with flatnut on the
profile,
in line with where the motor columns
are placed.
Tighten the bottom screws to fasten the
bracket.
4.1.6
Mount corner bracket
Use 4x M8x14 screws and flatnuts. Tighten
screws after placement of corner bracket.
4.1.7
Mount profile and adjustment screws on
motor columns
Use tightening plate and two M6x12 screws.
4.1.8
Level out the system by adjusting the nuts
at the bottom of the motor column
