Page 7
5.
Mounting instructions, illustrations
Mounting must always be carried out by competent personnel.
Prior to mounting, check that all parts have been provided. See list of components, section 6.
5.1
Assembly of frame
6.1.3 Now mount the two front fascias.
Tighten the bolts securely by means of
the wrench provided.
6.1.5 Fix the table top with screws through the
holes of the fascias.
6.2.1 Mount the wheels. Do not forget to fit
three washers on each wheel.
5.2 Mounting of wheels (option)
6.1.2 At the opposite end of the handle fit a
stop ring on either side of the angular
gear. Do not tighten the stop rings till the
frame has been assembled.
6.1.1 Check that the height (L) of all four legs is
identical. May be adjusted on hexagonal
shaft by means of the open-end wrench
provided. Place side fascias on a plane
surface and mount legs. See label on legs.
6.1.4 Place the frame on the table top and push
the cover plates between legs and table top.
Centre the frame in relation to the table top.
