Ropox 40-44000, Руководство пользователя

Страница: 10 / 42

Page 10
© ROPOX 2017
Manual
(40-44004 and 40-44005)
CONSTRUCTION
The wall must be made of a material
suited for screw mounting and
approved for damp rooms.
The hatched area is the minimum area
for reinforcement of the wall.
Reinforcement from floor to ceiling is
advisable.
Load-tested in Accordance to DS/ISO
17966, the maximum user weight has
been fixed at 400kg (881 lbs).
Max tensile load of upper screws
71kg/screw (157 lbs)
The washbasin is supplied with a set of
8 screws and rawlplugs suitable for
mounting on a concrete wall. The fitter
should always consider the material,
condition and strength of the wall and use
screws and rawlplugs suitable for the
specific wall type.
PLUMBING
The drain is Ø32
(1 ¼”) and ends in an
Ø32x88.5° drain elbow.
The maximum protrusion of drain
connection of elbow from the wall is
90mm
(3 ½”) to allow for the covers.
The water supply ends in 2 (two) 90°
shut-off valves pointing downward (not
included). The maximum protrusion of the
shut-off valves from the wall is 90mm (3
½”) to allow for the covers
It is important that all hoses for water
connection and drain are flexible to allow the
frame to move freely within the height
adjustment range of 710-1010mm
(28” – 39
8/10”) (including washbasin).
If a location of water supply and drain
different from the recommended positioning
is required and if there is a floor drain, the
Support Washbasin will have no covers.
For purchase of adapters for connection to
various standard installations, see
”Connection Adapters – Other Washbasins”.
NOTE
:
The illustrations show the left-hand
model 40-44004