Ropox 40-43011, Руководство пользователя

Страница: 21 / 23

21
TF 200.01.0044_eng
6.2 Troubleshooting
Faults Possible solutions
The seat cannot maintain
an upright position The internal spring might be defective; if so, contact
Ropox for a new part.
The seat is unusually
heavy to lift Detach the plastic cover by the wall bracket.
•
If the springs have come loose, put the springs into
position while the seat is in an upright position.
•
If one or both springs is/are defective, contact
Ropox for new parts.
The seat cannot be fully
folded down and does
not rest in a horizontal
position. NOTE: only valid for version with a leg:
•
Set the feet to the correct height
•
Alternatively, the seat might have been installed too
low (see installation instructions for the minimum
position for wall installation).
7. Environmental protection
The product is not intended to be disposed as municipal waste. Proper disassembly, sorting and
disposal of components must be done by waste disposal professionals.
Part Disposal recommendation
Seat Plastic
Unit Steel waste
Cover Hard plastic