TF 200.01.0010_ENG
13
4.2.5 Attach cover plate
A) Lower the unit to the down position
by releasing the grey lever/arm on the
side of the unit
B) Slide cover on from above. Take care
not to bend the “fingers” on the sides
A) Position the bottom tabs of the cover
beneath the wall-bracket and fix in place
with the 4 dome-headed M5 screws
B) Check that the unit moves freely up
and down and does not interfere with
the cover
4.2.6 Final test of completed unit
Everything should now be installed. Please follow the checklist below to make sure that everything is working
as expected.
1)
Test that the unit feels sturdy and secure on the wall
2)
Check that the unit moves smoothly and unobstructed in its full range of movement, both up and
down
3)
Check that the unit fits the end user and is comfortable to use when in the lowest position (that
the bottom of the sink does not severely interfere with the user’s legs or knees)
4)
Check that the locking pin clicks in place when unit is in the up position and that the wash basin
feels securely locked
5)
Check that the faucet works and the water drains as it should
6)
Check that the flexible plumbing is neat and moves unobstructed when moving the unit up and
down
