TF 200.06.0003_ENG
11
4. Instructions for use
4.1 Product assembly
4.1.1 Assembly of legs
Mount the legs with 8x enclosed M8 bolts. It is recommended to cross tighten the 4 bolts, on each leg
assembly.
Note!
Remember to use locking shims! All bolts are tightened with a torque of
12Nm / 8.9ft/lbs
4.1.2 Connection of wires in the controlbox
Wires are connected according to picture and designation shown below.
A Motor cable 1
B Motor cable 2
C Handset
D Battery (accessory)
Note!
All wires are sealed with O-rings, make sure these a fully engaged by pushing the
connectors firmly to the bottom of the socket.
