Side 7
4.
Initializing the Smartbox
Up to 4 FlexiElectric can be connected side by side by the use of the Smartbox. Above this you
can also connect up to 4 VertiElectric side by side. This means that you can connect a maximum of
8 Smartboxes in one system. To see your combination possibilities, please refer to page 9.
All Smartboxes are given a unique number
!
FlexiElectric: Can only achieve uneven numbers as 1,
3
, 5, og 7.
VertiElectric: Can only achieve even numbers as 2, 4, 6, og 8
Smartbox No. 3 is ALWAYS master, and must ALWAYS be a part of your system.
4.1
Numbering the Smartbox on the 8 polet DIP switch (Pos. 9):
Set the dipswitch with the number of the unit FlexiElectric or VertiElectric, this example is for
FlexiElectric No. 3, which also are the master box
See also schematics
page 8
4.2
Indicate / Set first and last Smartbox in the system (Pos 10):
You need to tell the system how many Smartboxes you have in the system. You have to indicate /
set the
first
and the
last
Smartbox in the system.
Use the DIP switch (pos 10) by setting No. 1 in
ON position, both on the
first
and also on the
last
Smartbox . All other Smartboxes in the system
has to be OFF.
See also schematics (No. 2 is not in use).
page 8
4.3
Perform Master reset:
Connect main power to all the controlboxes in the system.
Perform a reset of the master Smartbox (No. 3) - Deactivate the master by setting DIP switch (Pos.
9) to OFF. Activate again by setting it back to ON.
When you make this reset, the master will count the numbers of Smartboxes connected in the
system, and the LED (Pos 8) will flash the numbers.
After this procedure, the LED will turn off and work as normal
By activating the Safety strip, the LED will light up
Make a performance test according to section 6.
ON
OFF
