Technical data
Page 42
RES-407
Version 1
9
Technical data
Type of construction
Housing for installation in the electrical cabinet
Snaps onto a standard top hat rail (DIN TS35 rail, 35mm) acc. to DIN EN 50022
Dimensions: 90 x 75mm; height: 135mm (incl. terminals)
Line voltage
All controllers manufactured as of April 2005:
115VAC version: 110VAC -15%…10% (equivalent to 94…132VAC)
230VAC version: 220VAC -15%…10% (equivalent to 187…264VAC)
400VAC version: 380VAC -15%…10% (equivalent to 323…456VAC)
All controllers manufactured as of January 2004 up to March 2005:
115VAC version: 115VAC -15%…10% (equivalent to 98…132VAC)
230VAC version: 230VAC -15%…10% (equivalent to 196…264VAC)
400VAC version: 400VAC -15%…10% (equivalent to 340…456VAC)
All controllers manufactured up to December 2003:
115VAC, 230VAC or 400VAC, tolerance: +10% / -15%
Depending on the controller version (
section 12 "How to order" on page 47)
Line frequency
47…63Hz, automatic adjustment to frequencies in this range
Auxiliary voltage
Terminals 12+13
24VDC, +20%, -10%, reverse polarity-protected
Current input
(up to March 2005):
max. 50mA
(as of April 2005):
max. 1.0A
Heatsealing band
type and temperature
range
All controllers manufactured as of April 2005:
The temperature range and temperature coefficient settings can also be specified
by means of the ROPEX visualization software (
section 7.11 "Diagnostic inter-
face/visualization software (as of April 2005)" on page 33) in addition to the rotary
coding switch (see below):
Temperature range:
200°C, 300°C, 400°C or 500°C
Temperature coefficient: 400…4000ppm (variable setting range)
All controllers manufactured as of June 2003:
Five different ranges can be set on the controller with a rotary coding switch:
Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20), default
Temperature coefficient 780ppm, 0…300°C (e.g. Alloy L)
Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20)
Temperature coefficient 780ppm, 0…500°C (e.g. Alloy L)
Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500)
All controllers manufactured up to May 2003:
Default value 300°C, Alloy A20
The temperature range and alloy are selectable with MOD 37.
Analog input
(set point)
Terminals 16+14
0…10VDC, I
max
= 5mA, electrically isolated
Equivalent to 0…300°C or 0…500°C
or with an external PD-3 or PD-5 precision potentiometer (R = 2kohms)
0…2kohms equivalent to 0…300°C or 0…500°C
Analog output
(actual value)
Terminals 17+14
0…10VDC, I
max
= 5mA, electrically isolated
Equivalent to 0…300°C or 0…500°C
Accuracy: ±1% add. 50mV
