4. Start the Wraptor. First push power switch on. Second, push choke lever up. Third, start
motor. Once started, run it up the Wraptor line until at chest level.
5. Attach your climbing line to the Wraptor. Tie into ring at the bottom of the unit with your regular
hitch. (ie. blakes, icicle, or taut line)
6. Attach Ropewalker lanyard to your harness
7. You are now ready to ascend to your TIP. Hold handle with right hand and pull trigger to
modulate speed. Do not hold ascent rope with free hand. If you feel the need to hold something,
you can hold your climb line. As you ascend, look up to avoid branches and other hazards. It is
advised to operate at full throttle most of the time to avoid clutch slippage.
