Page 7
Page 2
PAGE 7
The System cabinet comes with LED lighting, which is controlled via an IR sensor
located on the underside of the product. The lighting can be controlled as detailed
below:
Turn Mirror ON/OFF
To turn the product on/off, slowly
wave your hand in front of the IR
sensor.
Operating Instructions
Change LED colour
1. When the product is OFF
2. Hold your hand in front of the
IR sensor to adjust the colour
temperature.
3. Remove hand from IR sensor
once desired colour temperature
is achieved.
Note: When the cabinet is
switched on/off the colour
temperature will be memorised.
Warm
White
2700K
Daylight
White
6000K
Natural
White
4000K
Change LED intensity
1. When the product is ON
2. Hold your hand in front of IR
sensor tp adjust the brightness.
3. Remove hand from the IR
sensor once desired brightness
reached.
Note: When the cabinet is
switched on/off the brightness
will be memorised.
<10%
100%
Hold hand
in position
DO NOT connect
to a plug & socket outlet.
WIRING DIAGRAM - MAINS SUPPLY
COLOUR CODING:
L - Live
= Brown
N - Neutral = Blue
- Earth = Green & Yellow
2
2
2
OUTSIDE
ZONES
2
ZONE
1
0.75m
2.25m
3.0m
0.6m
0.6m
0.75m
IEE Bathroom Zones Diagram
Distances from a bath tub or shower tray
Bathroom fittings are subject to the appropriate zones in accordance with IEE
Regulations. This product is
only
suitable for permanent indoor installation in Zone 2
and outside zones. (See above). This product is
not
suitable for installation in Zone 0
or 1, saunas, steam rooms or shower cubicles. Do
not
connect to a trailing plug and
socket. Do
not
install onto surfaces that are either damp or electrically conductive.
Bathroom Zones
Electrical Safety
Suitable for UK Installations
only
.
All fittings must be installed by a competent person, in accordance with current IEE
wiring regulations. If in doubt consult a qualified electrician.
Important:
Always switch off the electrical supply at the mains before installation and
maintenance. It is recommended that the fuse is withdrawn or the circuit breaker is
switched off for the necessary circuit before installation commences.
This product is manufactured to class I category and
must
have an earth connection.
Hold hand
in position
