PAGE 4
PAGE 5
Page 4
Page 5
Installation Procedure
The wall surface must be of suitable strength and construction.
1) Determine if the mirror is to be fitted portrait or landscape
2)
Measure the distance (X and Y) between the wall fixing pins on the back of the
mirror.
3)
Mark out the wall mounting plates on the wall using a pencil to the desired height
ensuring they are spaced at distance (X or Y).
Drill the marked out positions and fit the wall plugs accordingly. Secure the wall
mounting plates in position with the screws provided.
NOTE:
The wall plugs supplied are only suitable for solid stone / brick walls. For
plasterboard walls use specialist wall plugs.
4) The next step is to make the electrical connection from the mirror to the mains
supply. Use the connection wire found at the rear of the mirror to make the necessary
connections in accordance with the current IEE regulations. A second person will need
to hold the mirror in place whilst electrical connections are made.
5)
The mirror should slide onto the wall mounting brackets and secure into place.
4
3
Mains Supply
Distance X
Installation Procedure & Operating instructions
LED lights
The Forte mirror comes with LED lighting, which is controlled via a touch sensor
(1) located on the front face of the product.
•
The demister pad will be on when the LED lights are on.
•
Bluetooth
®
will be on regardless if the lights are on/off.
Turn Mirror ON/OFF
To tur
n the product on/of
f,
short press the power button
(1).
Measure
Distance X
Back View
Measure
Distance Y
2