background image

ENVY 1200 WALLMOUNTED WASHSTAND

FITTING INSTRUCTIONS

Please retain for future reference

REF:   RR.EN1200x | V2.00 07.11

Customer S  ervices, Roper Rhodes Ltd, Brassmill Lane Trading E state, Bath, BA1 3JF

TEL: 01225 303 900  

|

  FAX: 01225 448 877    

Email: [email protected]  

|

  Web: www.roperrhodes.co.uk

WAX FREE 

POLISH

We recommend...

Wipe  away  any  water  splashes  or  condensation  after 
use.  Excessive  exposure  to  water  will  deteriorate  the 
furniture.

All bathrooms should be well ventilated with a suitable 
extractor fan.

Clean with a soft damp cloth only.

Use a wax free polish if one must be used.

For  removal  of  lime  scale  deposits  use  a  suitable 
proprietary cleaner. If necessary test on an 
inconspicuous area first.

WIPE AWAY

Please DO NOT...

BLEACH

CLEANER

CREAM 

CLEANER

Do not scrub or scour 

Do not use abrasive cleaning agents 

Replacement components

Should you require any replacement components for this product please contact 
Roper Rhodes Ltd using the contact details below.

Fitting basin / overflow kits

The basin is supplied with 2 overflow kits which contains: 1pc plastic corrugated pipe, 1pc thin rubber stepped washer, 1pc thick rubber stepped washer,  

overflow attachment. These should be used with a slotted waste to allow the overflow to function correctly.

The waste should be placed through the basin hole and then the components should be slid down over this as in figure 3 below (items supplied with waste may 

vary). The waste should be rotated such that the slot is in line with the inlet on the overflow attachment. The waste nut should be tightened to fully compress all 

of the fittings in place. Finally the plastic tube should be attached to the basin and overflow attachment as shown in figure 4 Silicone sealant should be used at 

both ends and anywhere deemed appropriate. This should be tested for water-tightness prior to domestic use.

The basin should just be placed onto the unit. The taps and overflows should all be attached and plumbed in prior to sealing the basin in place using silicone 

sealant. The unit has been designed to allow routing of the plumbing along  the back side of the unit.  

Furniture aftercare instructions 

 

As will all wooden furniture, this product should be treated with care. If any part of the units is cut during installation it must be re-sealed with an appropriate

waterproof sealant

4

3

basin

1. waste (slotted)

3. overflow attachment

7. waste nut

6. waste metal ring

5. waste rubber washer

2. overflow thin rubber washer

4. overflow thick rubber washer

slot

inlet

Отзывы: