O X 2 & O X 2 O A S S E M B L Y I N S T R U C T I O N S & M A N U A L
3 2 - 1 0 1 5
R E V . B
6
Product Installation
STEP 1
1-1
With 2 bolts installed as shown adjust the distance between
bracket plates as close to the beam width as possible while allowing the
unit to be mounted.
1-2
If necessary use additional ½” steel washers (not provided) to
ensure that once the bold is tightened it does not touch the rope or
drum.
1-3
Tighten all hardware.
Note:
Do not attempt assembly alone. 2 person installation required. Never hang on
the unit or the rope. This will void the warranty and may result in injury or death.
1-1 Adjust gap as described
Use 2 bolt, washers and lock
nuts to secure in place. Once
adjusted in place use remaining
2 bolts with hardware.
1-2 Lock-nut on this side.
Bolt to protrude a
maximum of 1/8” from
top of lock-nut surface
1-2 If necessary use
additional steel washers
on this side