Rope M588, Руководство пользователя, Страница: 10 / 12

ROPE INNOVATION CO., LTD. CONFIDENTIAL NO.
：
ROPE-15121802
Copyright © 2017 ROPE INNOVATION CO., LTD. All rights reserved. Website: www.myrope.cn 10
Check Service
Number GetService,password
Eg: getservice,123456 The device will reply with the service
numbers
Enable Auto
Answer Call
(Voice Monitoring) AUDIO-EN,password
Eg: audio-en,123456 Config OK=Set successfully
Config failed=fail to set
Disable Auto
Answer Call AUDIO-DIS,password
Eg: audio-dis,123456 Config OK=Set successfully
Config failed=fail to set
Recover to Default
Settings Reset,password
Eg:Reset,123456 It will recover the IP to be 211.154.139.208,
port to be 7000, APN to be cmnet
(
If your device version is before 2016-04-07
08:00:00, pls use this command:
DEF-PARA,password )
Set Interval interval,x1,x2,password
Eg: interval,30,100,123456
30=ACC ON
100=ACC OFF
X1=ACC ON interval (second),
X2=ACC OFF interval (second).
(If your device version is before 2016-04-07
08:00:00, pls use this command:
GINTERVAL,X1,X2,password)
Enable sleep mode sleep enable,password
Eg: sleep enable,123456
Config OK=Set successfully
It’s for save battery purpose
Disable sleep
mode sleep disable,password
Eg: sleep disable,123456 Config OK=Set successfully
Enable Limit for
Voice monitoring, LisLimit,ON,password
Eg: LisLimit,ON,123456 It will limit the voice monitoring phone
number within the preset SOS alert number
(If your device version is before 2016-04-07
08:00:00, pls use this command:
LisLimite-Enable,password)
Disable Limit for
Voice monitoring LisLimit,OFF,password
Eg: LisLimit,OFF,123456 Default setting
(If device version is before 2016-04-07
08:00:00, Pls use this command:
LisLimite-Disable,password)
6
．
Trouble shooting
6.1. After installing it in the first time, if device cannot get connected with platform server, at this time it is
“logged off” status in platform.
Follow the instructions one by one as below:
1) Call the device to see what happens.
If rings: go to the next step.
It not rings:
a. check whether the SIM card installed correctly or not. Check whether the connection of power-line is
correction or not . (Details: If the users are testing the device in office or at home, M588 has to connect with
12V DC external power supply. If it is tested in the car, make sure the installer connect all the cable