ROPA KS 475, Перевод оригинального руководства по эксплуатации

Страница: 79 / 110

Maintenance and service
Cardan shaft above topper shaft
7.2 Cardan shaft above topper shaft
The maintenance work on the cardan shaft of the KS 475 or the cardan shafts of the
KS 490 can be performed above the topper shaft only if the protective casing(s) are
dismantled.
Proceed as follows:
– Lower the machine when attaching it to the tractor until it stands on the support
wheels. Switch off the tractor and secure it from accidental rolling away and restart.
The illustration shows KS 475
(1) Safety screws front
(2) Cardan shaft protective casing
– Loosen both front safety screws ( 1 ) and both rear safety screws and pull the pro-
tective casing ( 2 ) off upwards.
The illustration shows KS 475
(3) Cardan shaft profile
(4) Joint fork clamping screw
(5) Knuckle joints
(6) Cardan shaft freewheel
79 / 110