ROOTS Wizzard 340 Pump, Руководство оператора, Страница: 14 / 18

14
Wizzard 340 Pump - Battery
Trouble Display Reason Remedy
Transport working knob is in bottom
position
Change to operating position
Main switch is on Off position Switch on the main switch
30 A fuse blown Replace fuse and check
Handle switch, tilt switch are
opened/faulty
Check switches
Battery low voltage Charge the battery
Motor over heated Wait for 20 minutes and restart
Worn brushes
Damaged lip on recovery tank
Broken lugs on recovery tank
Drum not revolving
Bridge fitted wrong way on machine or
springs broken
Fit bridge in correct way
Blocked jet
Blocked inline filter
Faulty pump
Blocked filter or faulty valve in solution
tank
Faulty pump micro switch
Damaged or broken pump On/Off cord Check cord
Plastic gear inside rim of drum sheared
Drum sprocket bearing seized
Build up of dirty hair etc. around bridge
springs
Plastic gears in gearbox stripped
Drum rubber sleeve loose on drum
LED blinks in RED
NA
NA
NA
Clean jet or inline filter
Replace brush, lip, lugs or springs
Clean drum and bearings and
remove dirt and build up
Machine fails to start -
no power
Brushes not rotating
Machine fails to pick up
water from the floor
Machine fails to spray
solution onto the floor
Drum not rotating
No LED Display
MAINTENANCE - Troubleshooting