ROOTS RB650 Premium, Руководство оператора

Страница: 63 / 92

63 RootsScrub RB 650/750
MAINTENANCE
MAINTENANCE WORK
Compliance with our recommendations concerning maintenance work will
give you the certitude always having a machine at your disposal, which is
ready to work and in good operating condition.
Please contact your local Roots Multiclean Ltd. dealer. The people there will
be glad to perform that work for you. Their well trained personnel and
genuine Roots spare parts are at your disposal.
l
Well trained personnel and genuine Roots spare parts are at your disposal.
l
In case of any inquiry or order for spare parts, please always quote the
machine's serial number mentioned on the nameplate.
l
The name plate is fixed in the rear side of the machine.
l
When cleaning or servicing the machine, and when replacing any part,
shut off the machine and on principle disconnect the power plug from the
power supply.
l
For reasons of safety during cleaning and/or maintenance work in or on
the tank, the tank lid - when lifted - must be secured so as to prevent
accidental closing or tilting down.
l
The machine may be taken into operation only if all guarding devices are
fitted and in protective position. As far as possible, cleaning should not be
done by hand, but using appropriate tools or equipment.
l
Maintenance and repair work may be carried out only by means of
suitable tools and by the people trained in the factory. For reasons of
safety, only genuine Roots spare parts may be used.
WARNING
IMPORTANT!
è
Maintenance and/or repair opera ons must be done by
skilled and authorized personnel; all opera ons on electrical devices are
to be performed by specialized personnel only.
è
Read this manual thoroughly before performing any repair or
maintenance opera ons.
è
For repair and/or maintenance of high reach areas of the machine, use a
suitable work li or working pla orms.
è
Use genuine Roots spare parts ONLY which are specifically designed for
the machine.
è
USE suitable PPE at all mes when working or servicing the machine.
è
ALWAYS SWITCH OFF AND REMOVE KEY BEFORE PERFORMING ANY
MAINTENANCE OR REPAIR WORK.
è
ALWAYS ATTACH A 'DO NOT START' OR SIMILAR WARNING SIGN TO THE
KEY SWITCH OR A CONTROL BEFORE CLEANING OR SERVICING THE
MACHINE.
DO NOT START
DANGER