ROOTS E4545, Руководство пользователя, Страница: 11 / 20

11
RootsScrub E Series
B. ON/OFF Switch for Suction Turbine
Ÿ
Is on when “B” is at position “ I “
Ÿ
Is off when “B” is at position “ 0“
C. Indicator Lamp
Ÿ
Glows when power is on.
D. Hour Meter
Ÿ
To show the total working of the machine in hours.
A. ON/OFF Switch for Brush Motor
Ÿ
Is on when “A” is at position “ I “
Ÿ
Is off when “A” is at position “ 0“
Brush Motor, Suction Turbine, and Indicator Lamp.
FIRST OPERATION OPERATION BRUSH
The brush must snap in immediately. A rattling
noise indicates that the brush head is not
correctly centered. Turn off switch ”A”, correct
position of brush head and turn on switch “C” for
locking. Now the brush is locked. Repeat locking
operation.
Installation of brush
When lowering the machine pay attention to
prevent the pedal for lifting of the brush head from
being pressed down.
Disc Type Brush
Removal of brush
Ÿ
Empty the tanks.
Ÿ
Lift the squeegee and the brush
head.
Ÿ
Turn on switch “C” for unlocking of
brush.
Ÿ
Raise the brush head and move
machine backwards.
Ÿ
Brush is now lying in front of the
machine.
Brush Lifting
Ÿ
Pedal is used to lift and lower the brush.
Ÿ
For lowering, first press the pedal a little to outside
(unlock) and then allow it to move slowly upwards.
Ÿ
For lifting, press the pedal slowly downwards and
make it lock.
Pedal to
raise
the brush
Brushes / Pads
The machine must be equipped with brushes from the
accessories kit, as required by the degree of dirtiness
and kind of ground.
Controls - E6050C & E6060
Ÿ
The tank should be empty.
Ÿ
Lift the squeegee.
Ÿ
Place the brush in front of the machine.
Ÿ
Raise the brush head.
Ÿ
Move the brush to center of the brush head.
Ÿ
Lower the brush head so that the catch is centered in
the brush.
Ÿ
Turn on switch “A” for a short time in order to allow
locking.
RootsScrub E 6060
A B C
D