Roots & Branches JOHNNY APPLE PEELER VKP1010, Инструкция по эксплуатации

Страница: 7 / 12

7
Adjust peeling arm
The peeling arm has been factory adjusted to have approximately
1/4 inch clearance between the peeling blade and the widest part of
the fork. To adjust the position of the peeling arm, either tighten or
loosen the adjustable screw to achieve proper spacing. Turn the
screw clockwise to adjust it away from the fork. Turn the screw
counter-clockwise to adjust it closer to the fork.
Place apple on fork
Press the thumb lever (see illustration on top of page 6). and pull the
driveshaft away from the coring/slicing blade. Pull until the fork is as
far away from the coring/slicing blade as possible. Center apple stem
end first in front of the fork. Press apple firmly onto the fork.
Turn the handle clockwise a few turns to make sure the apple is
centered on the fork properly. Adjust if necessary. The illustration
below shows how the apple should be placed on the fork when you
are ready to begin peeling.