![background image](http://html1.mh-extra.com/html/rooti/rootrx/rootrx_instruction-manual_1485626009.webp)
14
15
Brand
Model
Item
Operating Environment
Storage and transportation
Environment
Main Unit Weight
Dimensions for Main Unit
Rooti
Rooti Rx
Charging Dock
18 g
64 * 30 * 7 mm
-10~60
C
/ 10~95 %R.H.(noncondensing)
0~50
C
/ 20~93 %R.H.
Atmospheric pressure 80,0 kPa to 101,3 kPa
(noncondensing)
Charging Dock
Brand
Model
Item
Operating Environment
Storage and transportation
Environment
Main Unit Weight
Dimensions for Main Unit
Rooti
Rooti Rx
Electrode Sticker
0~50
C
/ 20~93 %R.H.
Atmospheric pressure 80,0 kPa to 101,3 kPa
(noncondensing)
3.2 g
32.7 * 115 * 5.2 mm
Electrode Sticker
-10~60
C
/ 10~95 %R.H.(noncondensing)
Federal Communications Commission (FCC) Statement
(1) This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause
undesired operation of the device.
(2) You are cautioned that changes or modifications not expressly approved by the part responsi-
ble for compliance could void the user’s authority to operate the equipment.
(3) This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure:
“For body worn operation, this Rooti RX has been tested and meets FCC RF exposure guidelines
when used with an accessory that contains no metal and that positions the Rooti RX a minimum
of **5mm** from the body. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.”
To comply with the FCC RF exposure compliance requirements, this device and its antenna must
not be co-located or operating in conjunction with any other antenna or transmitter.
European Union Regulatory Notice
This device bearing the CE marking is in compliance with the essential requirements and other
relevant provisions of Directive : 1999/5/EC. This device complies with the following harmonized
European standards.
Radio: ETSI EN 300 328 V1.9.1 : 2015 / BS EN 62479 : 2010
EMC: EN 301 489 –1 v1.9.2: 2011 / EN 301 489 –17 v2.2.1: 2012
EN 55022: 2010+AC: 2011
EN61000-3-2 : 2006+A1:2009+A2:2009 / EN61000-3-3 : 2008
EN 61000-4-2 : 2009 / EN 61000-4-5 : 2006
EN 61000-4-3 : 2006+A1:2008+A2:2010 / EN 61000-4-6 : 2014
EN 61000-4-4 : 2012 / EN 61000-4-11 : 2004
Safety : EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013
©2016 Rooti Labs Limited. All rights reserved. Reproduction in whole or in part is prohibited.
Rooti and Rx are trademarks of Rooti Labs Limited, applied in the U.S. and other countries.
Service Life
Expected Service Life: 1 year