ROOTECH ACUURA 2350-TEMP, Руководство пользователя

Страница: 20 / 43

Chapter 3 Accura 2350-TEMP Operation/Setup Accura 2350-TEMP User Guide
Page 20 ⓒ 2020 Rootech Inc. All Rights Reserved
RJ12 Communication Port
It is located on the left and right sides of the Accura 2350-TEMP module and is used when connecting
the Accura 2350-TEMP module with the Accura 2350 module in a daisy chain topology. RJ12A and
RJ12B ports have the same functions.
Item Description
Port name 2 ports (RJ12A, RJ12B)
Connector type RJ12 connector
Protocol RS-485 based internal dedicated protocol
RJ45 Communication Port
It is located at the back of the Accura 2350-TEMP module and is used when connecting Accura 2350-
TEMP to Accura TSEN.
Item Description
Connector type RJ45 connector
Protocol RS-485 based internal dedicated protocol
RESET Button
It is used to reset external temperature events on the Accura 2350-TEMP module. Users can also reset
event alarms by enabling the reset function for the DI and the EVENT button on the Accura 2350-TEMP
module.
Digital Input (DI)
The Accura 2350-TEMP module supports 1 uninsulated DI channel. Users can reset settings for event
alarms by connecting a switch to the DI port and controlling the switch in the status the reset function
for the DI is enabled.
Item Description
Port name DI, DIG
Connector type Screw-type terminal
Wire specs 0.21 – 3.5 mm
2
(24 – 12AWG)
Insulation method Uninsulated
Input type Open/Closed contact point (internal power is used)
Minimum time the contact
point is in closed status 20 msec