ASSEMBLY INSTRUCTIONS
Step 1:
Take out carefully the back cushions from the packing and console's backrest from inner console frame
with its triangle nuts.
Step 2:
Positing the female metal receiver brackets over the male metal posts. Push down the female brackets
over male posts simultaneously until each side is locked into place an audile "click" is heard.
Attached the console backrest onto the console frame. Identify the triangle nuts going through the dust cover,
push down the backrest and tighten the screws to lock and so avoid the backrest to move. Repeat this step, twice
for each console.
Step 3:
Insert the wings to the back on both sides. Please pay attention to the directions.
WARNINGS
* Keep unit at least 6" from wall.
* Keep unit at least 24" from all heat sources.
* Avoid placing unit in areas where unit can be exposed to direct sunlight other powerful light sources, as fading or
discoloration may occur.
* Do not reach under seat when mechanism is operating or serious injury may occur.
* Reclining mechanism should only be operated while seated properly.
