Remove center molding by lifting up then pulling out
Unfold desk leg and look for hardware pack inside desk box.
Unfold corner supports
(from desk box hardware pack) in the pre-bore hole.
Place folding desk by sliding into the opening of loft chest
For desk on the right
remove third drawer, and secure desk with
ASSEMBLY INSTRUCTIONS
Secure each corner block with 1 1/4" screw
then push down
one 3/4" screw (from desk box hardware pack) .
1/0/1900
Page
61
of
72
STEP 32
STEP 34
STEP 33
STEP 35
STEP 36
C
C
STEP 37
J
J
J
