ASSEMBLY INSTRUCTIONS
Step 1:
Take out carefully the back cushions & seat from the packing.
Step 2:
Positing the female metal receiver brackets over the male metal posts. Push down the female brackets
over male posts simultaneously until each side is locked into place an audile "click" is heard.
POWER CONNECTION
Step 3:
Lift velcro flap located at the bottom back. Latch male wire plug from backrest (headrest motor wire) to
female wire receiver located at the bottom back underneath the flap. This instruction is applicable to all power
headrest. Allow sufficient space between reclining sofa and the wall behind it.
Step 4:
Latch male wire plugs from middle backrest (wireless charger) to female wire receivers located at the
bottom back underneath the flap.
Step 5:
Connect wall plug transformer to transformer switch.
And connect transformer plug to electrical outlet.
