Multistop Roller Blind Installation Manual
Issue 01 | January 2014
7
Drill the remaining holes in the roller blind channels. Repeat on the other side.
Note: Do not drill deeper than 10mm through the integral lining.
Step 4.0
Screw in the remaining screws (Part B) through the drilled holes on both sides.
Note: Do not drill deeper than 10mm through the integral lining.
Step 4.1
Please note: these images do not show a complete roof window installation with painted linings and
internal finishes. Please refer to the image on page 8 which demonstrates a completed installation.
Please note: these images do not show a complete roof window installation with painted linings and
internal finishes. Please refer to the image on page 8 which demonstrates a completed installation.
