Assembly instructions
changing bench 8530/32
Description:
Changing room benches made of aluminum system profiles. Surface in aluminum natural
anodized E6/EV1 or on customer request aluminum RAL powder-coated. Height adjustable
gliders are used to protect the floor. The coat hook rail has safety hooks according to
GUV-SR 2001 according to DIN 7917, approx. 5 pieces per running meter.
Use:
The changing benches are suitable for normal sitting use. Use by one or more persons
standing and / or jumping on the benches or shoe storages is not intended. Damage caused
by improper use is not a reason for complaint and therefore not part of the warranty.
Improper use:
In case of improper use, the warranty and the manufacturer´s warranty obligation expire.
This includes gymnastics and climbing on the changing benches. The hooks of the coat
rack are to be used exclusively for hanging up clothes and must not be used for heavy
objects or even sports equipment.
Maintenance:
The changing benches must be checked for safety at least once a year. The aluminum
frames must be checked for damage and tight fit. The seat rails are to be checked for
damage and cracks as well as splintering of the wood after damage.
The seating surfaces are suitable for a resting load of up to 150 kg per running meter.
Hazard notice:
•
care should be taken to ensure that damaged benches are blocked from use and repaired
immediately by our professional fitters.
•
broken coat hooks must be replaced to prevent injury from the breakage.
•
floor mounting is only possible if stability is ensured and no floor heating is installed in
the mounting area.
Technical data:
See front page. Further information is available in the download area at www.rontec.de
Reference to standards:
DIN 7917 (changing room benches)
Notice:
These assembly instructions represent a service, but not the content of the performance
claim. If the defect consists of faulty assembly instructions, rontec GmbH Metallwerke
shall only be obligated to subsequently deliver error-free assembly instructions.
Dat
e 03.2021
rontec GmbH Metallwerke
Gottlieb-Wolfer-Str. 8
73770 Denkendorf
Germany
Expert telephone: +49 (0) 711 77396-5
Fax: +49 (0) 711 77396-99
Fast answer: info
@
rontec.de
www.rontec.de