Ronstan Safety Rail System S22 Скачать руководство пользователя страница 10

Страница: 10 / 10

Ronstan International Pty Ltd

19 Park Way, Braeside, Victoria 3195 Australia
Tel: +61 (0)3 8586 2000 Fax: +61 (0)3 8586 2099 Email: [email protected]

E.U. Representative: Ronstan Denmark ApS

Jægervænget 36, 7100 Vejle, Denmark
Tel: (45) 76 42 77 77 / Email: [email protected]

ISSUED 22/02/13

APPENDIX C

Safety Rail Cars

Procedure for Annual Inspection and Revision

Inspection of working track(s) and end stops to ensure all fastenings are secure and

there are no signs of damage.

Removal of car from track.

Visual inspection to identify any worn, deformed or damaged parts.

Verification of plunger stop functionality.

Disassembly of car including removal of ball bearings and pivoting shackle.

Visual inspection of disassembled car for signs of corrosion, and inspection of shackle

pin for wear.

Fresh water cleaning and removal of any contaminants.

Replacement of Torlon ball bearings if required.

Replacement of rubber buffers if required.

Lubrication of plunger stop.

Replacement of any other worn or damaged components (note details below if

applicable).

Re-assembly of car on loading track.

Installation of car on working track; verify again that end stops are properly secured.

Recording of inspection and revision in the Equipment Record, appendix B in the User

Manual.

Notes:

Part Number

Description

Quantity

Label Reference

Date:

_______________________________

Location:

_______________________________

Inspected by:

_______________________________

Содержание Safety Rail System S22











Результаты поиска

Содержание Safety Rail System S22

Отзывы:

Бренды по названию

Популярные бренды

Ronstan Safety Rail System S22, Руководство пользователя

Результаты поиска

Содержание Safety Rail System S22

Отзывы:

Бренды по названию

Популярные бренды