Ronstan RF6 Скачать руководство пользователя страница 4

Страница: 4 / 6

PREPARING STAND-UP BOOT

The boot is primarily designed to suit the Ronstan shackle head
Series 55 Ratchet Orbit Block

™

. If a smaller block is used the boot can be cut to suit.

www.ronstan.com

1. If using Ronstan Series 40 Orbit Block

™

2. If using Ronstan Dyneema link head,

Series 55

Orbit Block

™

Содержание RF6

Страница 4: ...d to suit the Ronstan shackle head Series 55 Ratchet Orbit Block If a smaller block is used the boot can be cut to suit www ronstan com 4 1 If using Ronstan Series 40 Orbit Block 1A 2A 1B 2B 1C 2C 2 If using Ronstan Dyneema link head Series 55 Orbit Block ...

Страница 5: ...ce the inverted boot over the shackle then pass the pin through the headpost and tighten NOTE THE BOOT IS PRIMARILY DESIGNED TO SUIT THE RONSTAN SERIES 55 ORBIT BLOCK IF A SMALLER BLOCK IS USED THE BOOT CAN BE CUT TO SIZE Roll boot over to original position as shown above The two lugs in the underside of the boot will locate into the holes in the top of the base ...

Страница 6: ...SM Prevents the arm from swinging away when the mainsheet is not held www ronstan com 6 To Disengage turn switch anti clockwise RF6 will swivel freely To Engage Turn switch clockwise RF6 will engage ball ratchet This adds friction to the rotation ...