manualshive.com logo in svg

Ronstan BB Orbit Block RF25109 20 Series, Инструкция пользователя

Поделиться
Скачать
Ronstan BB Orbit Block RF25109 20 Series Скачать руководство пользователя страница 2

1.0 LASHING OPTIONS

1.1.1

1.1.2

1.1.3

1.1.4

1.1.5

Pass the line down through the 
head and out through the cheek.

Pass line through the hub.

Pass line in through the 
opposite cheek and back up 
through the head.

Finish lashing with appropriate 
knot, splice or whipping.

Pass line around fixing point.  
Repeat steps 1.1.1 to 1.1.3 
if more than one lashing is 
required to meet desired 
breaking load.

1.1 Attachment at 0° (in-line)

1.1

Attachment at 0°

1.2

Attachment at 90°

1.3

Line end attachment

Large diameter 
object attachment

(Must have at least 2 strands)

1.4

1.2.1

1.2.2

1.2.3

1.2.4

1.2.5

Pass the line down through the 
head, out through the cheek and 
through the hub.

Pass line in through the 
opposite cheek and back up 
through the head.

Loop line over the fixing point. 
Pass back down through the 
head and out the same cheek it 
last passed through.

Finish lashing with appropriate 
knot, splice or whipping.

Pass line through the hub, in 
through opposite cheek and up 
through the head. Repeat steps 
1.2.1 to 1.2.3 if more than one 
lashing is required.

1.2 Attachment at 90° (transverse)

Содержание BB Orbit Block RF25109 20 Series







Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды