USER MANUAL
11
.
DC APPLICATION
The DC terminal may be used for charging 12V automotive-type batteries only.
- When using automotive-type batteries with battery cables, be sure to
disconnect the minus pole battery cable from the battery before charging.
- Connect the charging cable to the battery terminals and the DC
terminal of generator.
- Connect the positive battery terminal to the positive generator terminal
- Do not reverse the charging cables, or serious damage to the
generator and/or Battery may occur.
- Do not allow the free ends of the cable to touch each other, if this
occur, it will be short circuit the battery.
- When a large capacity battery is charged, excessive current flows
(the value varies depending on the discharged condition) and the fuse
for DC current will burn out.
- Batteries produce explosive gases. Keep sparks, flames and
cigarettes well away.
- To prevent the possibility of creating a spark near the battery,
always connect charging cables to battery first and only then to
the generator. When disconnecting, you should disconnect the
cables at the generator first.
- Charge the battery in a well-ventilated place.
- Before charging, remove the cap from each cell of the battery.
Discontinue charging if the electrolyte temperature exceeds 45°C.
